New Machine Sync Activation

Ag Management Solutions
REQUEST A QUOTE
REQUEST A QUOTE
Key Features
  • Increase efficiency by showing multiple machines in the field at the same time.
  • Share coverage map and guidance lines for increased efficiency and complete field coverage when two machines are working in the same field.
  • Automates unloading on-the-go in order to reduce machine-to-machine interactions and allow operators to focus on operation.

More Info

Features

Enhance machine optimization

The John Deere Machine Communication Radio paired with the Machine Sync activation for the GreenStar™ 3 (GS3) 2630 Display synchronizes the movement between the combine and tractor/grain cart providing automated on-the-go unloading during harvest. A network consists of up to 10 machines, with any combination of tractor/grain carts to combines.

This automation allows for:

  • Managers and operators to make the best decisions to maximize the harvesting fleet with logistics information
  • Operators to be less fatigued and more alert throughout harvest even for the most experienced individuals
  • Peak performance from John Deere equipment by keeping combines harvesting crop
  • One more reason to own John Deere
Capitalize on coverage map and guidance line sharing
Coverage map and guidance line sharingCoverage map and guidance line sharing

Machine Sync coverage map sharing enables John Deere Section Control enabled machines to trigger section control on/off based upon another machine’s coverage. Sharing coverage maps while seeding, spraying, or applying nutrients allows multiple machines operating in the same field to more efficiently control inputs. Calculation of harvested area also increases accuracy when utilizing coverage map sharing.

 

Machine Sync guidance line sharing enables AutoTrac™ enabled machines to share straight track guidance lines with another machine operating within the same client, farm, field and task. Streamline the process of sharing guidance lines with Machine Sync; simply share the AB line to another GreenStar™ 3 (GS3) 2630 Displays in near real-time. Once, a guidance line is received the line can either be saved for later use, adding the line into the list of available straight track lines or set for use allowing guidance lines to automatically generate and immediately be used. Guidance line sharing is optimized between machines with the same track spacing; if machines have different track spacing, it is recommended to have those machines work different areas of the field. If machines must work in the same area of the field with different track spacing, operators need to use shift track to line up each pass.

 

Coverage map and guidance line sharing changes the way operators approach a planting, spraying, or harvesting a field. With near real-time coverage map sharing, machines can plant, spray or apply in whatever pattern makes the most sense within the operation and automatically command section control on/off based upon the other machines coverage. Coverage maps are shared between GS3 2630 Displays operating in the same client, farm, field, and task.

 

Guidance lines of any global positioning system (GPS) accuracy level (SF1, SF2, SF3, and RTK) can be shared between machines however; accuracy of shared guidance line and coverage maps is related to the StarFire™ Receiver accuracy level. As the accuracy level increases, coverage map and guidance line sharing accuracy also increases.

Multiple communication options

Machine Communication Radio (MCR): When the Machine Sync application is paired with an MCR, coverage maps and guidance lines can be shared between two machines operating in the same client, farm, field, and task. Because the MCR solution creates its own wireless network, cellular coverage and a JDLink™ Connect subscription are not required. Data sharing is limited to vehicles within a 3-mile radius, and line of sight is required between vehicles. MCR hardware is required for harvest automation and logistics functionality.

 

Modular Telematics Gateway (MTG): When the Machine Sync application is paired with MTG 3G or newer communication technology, coverage maps and guidance lines can be shared between two machines in a single Operations Center organization operating in the same client, farm, field, and task. Sharing can occur simultaneously or coverage maps and guidance lines will be stored by John Deere for an additional 14 days. Once shared, all coverage maps and guidance lines are stored on the display until cleared. In the event that coverage map and guidance lines need to be shared beyond 14 days and coverage hasn’t been deleted from display, reconnect both displays to the same client, farm, field, and task. Since the MTG 3G or 4G LTE leverages cellular communication technology, it allows multiple machines to communicate regardless of the machine’s proximity to the other as long as both are in areas with cellular coverage. A JDLink™ Connect subscription is required in order for the MTG 3G or 4G LTE option to be utilized.

 

MTG enabled Machine Sync Coverage Map and Guidance Line Sharing will work, through the end of 2017, with any MTG 3G or 4G LTE with an active JDLink Connect subscription and Machine Sync Activation. Subscription prerequisites beyond 2017 are subject to change.

Machine Sync functionalityMTG 3GMCR
Coverage map sharingYesYes
Guidance line sharingYesYes
Harvest automationNot availableYes
Harvest logisticsNot availableYes

John Deere Machine Sync coverage map and guidance line sharing enhances the efficiencies of operations running multiple machines together.

Increase efficiency with logistics information
#
Machine Sync logistics pageMachine Sync logistics page

John Deere Machine Sync provides valuable information that allows multiple tractor/grain cart operators to make decisions that save time, fuel, and reduce compaction.

Tractor/grain cart operators can view the following for each combine in the network on the GreenStar™ 3 (GS3) 2630 Display:

  • Vehicle type (combine or tractor/grain cart) identification by name
  • Grain tank fill status
  • Location
  • Direction of travel

A complete logistics view is also available to combine operators showing every combine and grain cart in the network.

John Deere Machine Sync’s logistical information enables tractor/grain cart operators to best determine what combine will need to unload first. This reduces the amount of time a combine waits for a cart and reduces unnecessary idle time. This information can also be helpful in managing transportation requirements.

The combine operator also has the ability to send out a request to unload. This allows the combine operator to influence the tractor/grain cart operator through the display. It is no longer necessary to solely rely on hand gestures or mobile phones to communicate an unload request.

Harvest automation and logistics paired with coverage map sharingHarvest automation and logistics paired with coverage map sharing

Pair coverage map sharing with harvest automation and logistics to gain additional efficiencies. Enabling the grain cart with coverage map sharing allows the operator to see headlands and areas of the field that have been harvested allowing them to plan the most efficient way to access combines operating in the field.

Maximize benefits with on-the-go unloading
S-Series Combine unloading on the goS-Series Combine unloading on the go
#

Machine Sync harvest automation makes on-the-go unloading more efficient. Combine productivity relies on keeping the machine running and never stopping to unload.

 For example, an S-Series Combine operating in high-volume crops, such as corn 6-10 ton (180-220 bu), can expect to be unloading 40 to 50 percent of the time. A producer could spend over half of a harvesting day with the unloading auger on.

Until now, successfully unloading grain into a grain cart while continuing to harvest crop introduces additional tasks operators must focus on:

  • Communication between operators
  • Matching speeds while unloading
  • Awareness of upcoming water ways and field contour
  • Agreement between fleet operators on how to cross waterways and contours
  • Awareness of equipment size and leaving adequate operating space

John Deere Machine Sync enhances the harvesting experience for even the most experienced operators. It allows both operators to focus on the key tasks of harvesting and unloading while minimizing the additional tasks created by on-the-go unloading. This results in operators who are more relaxed, productive, and alert while farming.

Set up with ease

John Deere Machine Sync is designed to be easily set up in six steps:

 

Step 1:Install Machine Communication Radio (MCR) and antenna
Step 2:Install Machine Sync activation in GreenStar™ 3 2630 Display
Step 3:Install tractor automation activation and any steering system unit (SSU) updates
Step 4:Set up or join desired field network
Step 5:Set home points between combines and tractor/grain tanks
Step 6:Begin experiencing Machine Sync logistics and automation
Experiencing the value of a network

The automation and logistic information provided by Machine Sync is made possible with the John Deere Machine Communication Radio. The network can include a total of ten machines, with any combination of tractors and combines.

The MCR creates a network between the fleet of tractors and combines allowing the display to show logistics information and allows for the automation between the combine and tractor.

On-the-go unloading
#
#

Operators will see the following information for each combine in a network:

  • Combine location and direction by name
  • Tractor/grain cart location and direction by name
  • Combine bin fill status
  • Combines that have made a request unload
  • Unique repeatable positioning for each tractor/grain cart

Combine operators, once paired with a tractor/grain cart, can also control the tractor's speed and nudge the tractor forward, backward, or laterally to maximize the filling of the grain cart. This control offers a significant reduction in stress to the combine operator.

Operation
Tractor in operational zoneTractor in operational zone

John Deere Machine Sync guides an approaching grain cart tractor to a predetermined position for unloading relative to a specific combine. This synchronization occurs once the tractor and grain tank enter an area to the left of the combine. This area is known as the operational zone, which is the orange box in the display image pictured above.

 

Once in the operational zone, digital radio communication commences between the two machines. At this point, the tractor operator can engage Machine Sync by pressing the AutoTrac™ assisted steering resume switch. This gives control of the tractor, including speed and direction of travel to the combine operator. Once the tractor reaches the predetermined unloading point or home point, synchronization occurs between the two machines.

 

As the combine continues to harvest, the combine operator can engage the unloading auger, offloading grain into the grain cart. While synchronized, the tractor and grain cart are mimicking the movements of the combine. The combine and tractor with the grain cart continue to travel in synchronized fashion until the combine or tractor operator disengages Machine Sync. The tractor operator can do this by simply taking control of the steering wheel. The combine operator can disengage through a button on the GreenStar™ 3 (GS3) 2630 Display. Machine Sync will automatically disengage at speeds below 0.5 km/h (0.31 mph) or above 16 km/h (9.94 mph).

 

While the combine and tractor/grain cart are tracking and unloading, the combine operator has the ability to make incremental speed and direction changes to the tractor to evenly fill the cart. Nudge buttons on GS 3 2630 Display allow the tractor/grain tank to be nudged forward, backward, or side to side. These changes in relative positioning help ensure the full capacity of the grain tank is being utilized. Final topping off of the grain cart may require the combine operator to swing the unloading auger for final filling.

Combine hydro handleCombine hydro handle

With W-, S-, and T-Series Combines, an optional field-installed hydro handle with an integrated nudge button is available.

Shared signal improves performance and lowers investment cost for precision agriculture systems

First introduced with the StarFire™ 3000 Receiver, the StarFire 6000 continues to provide shared signal functionality when pairing two receivers with Active Implement Guidance (AIG) or Machine Sync combine harvest automation via the GreenStar™ 3 2630 Display or Generation 4 CommandCenter™ display. Shared signal allows correction signals to be communicated between a pair of receivers, which can improve relative system accuracy and reduce the initial investment required to use AIG or Machine Sync combine harvest automation.

 

Supported configurations:

  • StarFire 3000 leader to StarFire 3000 follower
  • StarFire 3000 leader to StarFire 6000 follower - new for the 17-1 software update
    • SF2 fallback is not a supported mode for this configuration and the Use SF2 if RTK Signal Lost check box should be deselected by the operator if using radio RTK or mobile RTK with StarFire 3000
  • StarFire 6000 leader to StarFire 6000 follower

Leader definition - tractor receiver for AIG, combine receiver for Machine Sync combine harvest automation

 

Follower definition - implement receiver for AIG, grain cart tractor receiver for Machine Sync combine harvest automation

 

NOTE: StarFire 6000 leader to StarFire 3000 follower is not a supported configuration.

AIG

Shared signal enables StarFire receivers to share information when paired using AIG. This allows a StarFire receiver using a lower accuracy to be used on the implement for an AIG system and take advantage of the higher accuracy used by the machine receiver. The following table describes the accuracy that can be expected from this system:

 

Machine receiver activation level

Implement receiver activation level

Overall system accuracy level

Relationship between two receivers

SF3/SF2

SF1

SF3/SF2

RTK

RTK

SF1

RTK

RTK

RTK

SF3/SF2

RTK

RTK

Machine Sync combine harvest automation

Shared signal enables StarFire receivers to share information when paired using Machine Sync combine harvest automation. This allows the two vehicle receivers to maximize system performance during harvest operations. The following table describes the accuracy that can be expected from this system:

 

Combine receiver activation level

Grain cart tractor receiver activation level

Overall system accuracy level

Relationship between two receivers

SF1

SF1

SF1

RTK

SF3/SF2

SF1

SF3/SF2

RTK

SF3/SF2

SF3/SF2

SF3/SF2

RTK

RTK

SF1

RTK

RTK

RTK

SF3/SF2

RTK

RTK

Accessories and Attachments

AutoTrac Integrated Machine Kits

AutoTrac Combine Machine Kit - 50 Series (PIN 695101 and Above) - PF90876

Machines must be GreenStar™ ready to be compatible with the AutoTrac machine kits. AutoTrac machine kits include the appropriate machine steering controller when necessary and AutoTrac-ready accessories. Display, receiver, and software to complete system sold separately.

AutoTrac Combine Machine Kit - 60 Series - PF90875

Machines must be GreenStar™ ready to be compatible with the AutoTrac machine kits. AutoTrac machine kits include the appropriate machine steering controller when necessary and AutoTrac-ready accessories. Display, receiver, and software to complete system sold separately.

AutoTrac Electrical Connector Assembly - 7020 or 7015 Models - PF90495
AutoTrac Sprayer Machine Kit - 4720 Models - PF90808
AutoTrac sprayer vehicle kit for 4720 modelsAutoTrac sprayer vehicle kit for 4720 models
AutoTrac Sprayer Machine Kit - 4920 Models (PIN 003999 and Below) - PF90811
AutoTrac Tractor King Pin Kit - 6105R, 6115R, 6125R or 6130R (IT4) Models with MFWD - BPF10616

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor King Pin Kit - 6140R or 6150R Models with MFWD - BPF10560

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6105R, 6115R, or 6125R Models with MFWD - BPF10513

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6130R (FT4), 6120R, 6110R models with MFWD - BPF10989
AutoTrac Tractor Machine Kit - 6135R model with MFWD - BPF10987
AutoTrac Tractor Machine Kit - 6140R or 6150R Models with MFWD - BPF10387

AutoTrac field-installed kits are now available for 6105R, 6115R, 6125R, 6140R, or 6150R MFWD Tractors.

 

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors and are compatible with the GreenStar™ 3 or GreenStar 2 system components.

 

These kits contain all of the required hydraulic components and harnesses for field installation.

 

GreenStar display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or RTK
AutoTrac Tractor Machine Kit - 6145R, 6155R models with MFWD - BPF10985
AutoTrac Tractor Machine Kit - 6170R, 6190R or 6210R Models with MFWD - BPF10345

AutoTrac field-installed kits are now available for 6210R, 6190R, and 6170R MFWD Tractors.

These field-installed kits are an integrated guidance solution for John Deere 6R MFWD Tractors.

 

All required hydraulic components and harnesses for field installation are contained in these kits.

 

GreenStar™ display options:

  • GreenStar 3 (GS3) 2630 and CommandCenter™ 
    • AutoTrac activation for GS3
  • GreenStar 2 (GS2) 1800
    • AutoTrac activation for GS2

 

StarFire™ Receiver and signal options:

  • StarFire 3000
    • SF1, SF2 activation, or Real Time Kinematic (RTK)
AutoTrac Tractor Machine Kit - 6175R, 6195R and 6215R models with MFWD - BPF10683

The AutoTrac system reduces overlap, saving time, fuel, and labor costs. Whether breaking stubble with tillage equipment, planting or seeding, spraying or fertilizing, it reduces implement overlap by up to 90 percent. It also provides faster headland turns because the AutoTrac system takes the guesswork out of the return path.

AutoTrac Tractor Machine Kit - 6420 Models with MFWD - PF90568
AutoTrac Tractor Machine Kit - 7020 or 7015 Models with MFWD - PF90496

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7220 or 7320 Models with MFWD - PF90569
AutoTrac tractor vehicle kit itemsAutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
AutoTrac Tractor Machine Kit - 7420 or 7520 Models with MFWD - PF90570
AutoTrac tractor vehicle kit itemsAutoTrac tractor vehicle kit items
More AutoTrac tractor vehicle kit itemsMore AutoTrac tractor vehicle kit items
AutoTrac Tractor Machine Kit - 7630, 7730, 7830 or 7930 Models with MFWD - PF90894

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7720 or 7820 Models with MFWD and IVT Transmission - PF90891

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7720 or 7820 Models with MFWD and PowrQuad Transmission - PF90893

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 7920 Models with MFWD and IVT Transmission - PF90892

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8000 Series with MFWD - PF90863

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8000T Series - PF90396
AutoTrac Tractor Machine Kit - 8010 Series with MFWD - PF90862

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8020 Series with ILS - PF90861

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8020 Series with MFWD - PF90497

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with ILS 40 km/h (PIN 005466 and Below) - PF90818

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with ILS 40km/h (PIN 005467 and Above) - PF90820

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with MFWD (PIN 005466 and Below) - PF90817

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 8030 Series with MFWD (PIN 005467 and Above) - PF90819

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9020 Series Wheel with Steel Gudgeon (PIN 010444 and Above) or 9020 Series Wheel with Cast Gudgeon (All PINs) - PF90671

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9030 Series Wheel Scraper Tractor - PF90849
AutoTrac Tractor Machine Kit - 9R Series Wheel Scraper Tractor - BPF10629

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
AutoTrac Tractor Machine Kit - 9RT Series Scraper Tractor - BPF10631

When paired with a StarFire™ receiver and GreenStar™ display, the integrated AutoTrac™  machine kit completes the components that automatically steer the machine. This kit is tied directly into the steering system on the machine and, therefore, provides optimum accuracy. The steering kit components cannot be moved across machine platforms.

 

Key features of the integrated AutoTrac steering kit:

  • Integration, for a clean look in the machine
  • Uses GreenStar components and AutoTrac software
  • Works with the Original, GreenStar 2, or GreenStar 3 systems
  • Uses SF1, SF2, or Real Time Kinematic (RTK) satellite signal
SPFH Guidance Base Kit - 7000, 7050 and 7080 Series - BZ100079
AutoTrac SPFH base kit for ProDrive transmissionsAutoTrac SPFH base kit for ProDrive transmissions
SPFH SSU Controller - 7000, 7050 and 7080 Series - BZ100196
AutoTrac SPFH controller for 7000 and 7050 SeriesAutoTrac SPFH controller for 7000 and 7050 Series

AutoTrac RowSense Kits for Mechanical Feelers

AutoTrac RowSense Mechanical Feelers (20 In. Row Spacing) - PF90699
RowSense mechanical feelers (51-cm [20-in.] row spacing)RowSense mechanical feelers (51-cm [20-in.] row spacing)
AutoTrac RowSense Mechanical Feelers (22 In. Row Spacing) - PF90700
RowSense mechanical feelers (56-cm [22-in.] row spacing)RowSense mechanical feelers (56-cm [22-in.] row spacing)
AutoTrac RowSense Mechanical Feelers (30 In. or 75 cm Row Spacing) - PF90697
AutoTrac RowSense Mechanical Feelers (45 cm Row Spacing) - Argentina and Brazil - BPF10266
AutoTrac RowSense Mechanical Feelers (70 cm Row Spacing) - PF90698
RowSense mechanical feelers (70-cm [27.6-in.] row spacing)RowSense mechanical feelers (70-cm [27.6-in.] row spacing)
AutoTrac RowSense Retrofit Kit - Corn Head - PF90757
 RowSense retrofit kit for corn head RowSense retrofit kit for corn head

AutoTrac RowSense Kits for Universal Sensor

AutoTrac RowSense Kit for Universal Sensor - Combine - PF90742
AutoTrac RowSense Universal Sensor - PF91001
Case IH Corn Head Mounting Hardware - 2200/2400/3200/3400 Series 30" - PF90844
Drago Corn Head Mounting Hardware - All Series 30" - PF90977
Geringhoff Corn Head Mounting Hardware - NorthStar or Rota Disc Series 30" - PF90978
John Deere Corn Head Mounting Hardware - 600 Series 30" and 75cm - PF90843
John Deere Corn Head Mounting Hardware - 90 Series 30" (MY1994-2001) - PF91002
John Deere Corn Head Mounting Hardware - 90 Series 30" (MY2002-2007) - PF90794

AutoTrac Universal Supplemental Kits

AutoTrac Universal Auxiliary Resume Switch - PF90453
AutoTrac Universal auxiliary resume switchAutoTrac Universal auxiliary resume switch
AutoTrac Universal Guidance Harness Kit - BPF11129
AutoTrac Universal Horn Kit - PF90452
AutoTrac Universal horn kit AutoTrac Universal horn kit
AutoTrac Universal Hub and Anti-Rotation Bracket - PF90560

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

AutoTrac Universal Hub, Anti-Rotation Bracket and Hardware - PF90476

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

AutoTrac Universal Hub, Auto-Rotation Bracket and Horn Switch Kit - PF90565

AutoTrac™ is an assisted hands-free steering system that automatically steers the machine through the fields. For some of the competitive sprayers, an AutoTrac Universal Hub will be required along with other attachments. For complete compatibility information, see the ATU look up tool.

Device Connectivity

Ethernet Switch - BPF10746
Ethernet switchEthernet switch
#

The Ethernet switch enables connectivity for a GreenStar™ 3 (GS3) 2630 Display and a Generation 4 CommandCenter™ to the modular telematics gateway (MTG) to support MyJohnDeere applications. The Ethernet switch has five M12 Ethernet connectors and one M12 power connector.

GreenStar Brackets

Bracket - GreenStar Dual Display - PF90430
GreenStar dual display bracket GreenStar dual display bracket
Deluxe Shroud Conversion Bracket Kit - 6020 or 6030 Series or Small Frame 7000, 10, 20, or 30 Series Tractors - PF90780
Deluxe Shroud Conversion Bracket Kit - 9000 (MY1990 and Newer), 10, 50, 60 or 70 Series Combines; 7760, 9986 or 9996 Cotton Pickers or 7460 Cotton Strippers - PF91009
Deluxe Shroud Conversion Bracket Kit - Large Frame 7000/8000/9000 Model Tractors or 4700/4800/4900 Model Sprayers. For Series 00, 10, 20 or 30. - PF91010
Deluxe Shroud Conversion Bracket Kit - RTK Base Station/Tripod - PF90781
GreenStar Display Cornerpost Bracket - S-Series Combines - BPF11186
GreenStar Tractor Bracket Bundle - 6B Tractors - BPF11167
GreenStar Tractor Bracket Kit - 9020 Series - PF90409
GreenStar Tractor Bracket Kit - 9020 Wheel or 9020 Track Series - PF90199
GreenStar Tractor Harness Bundle - 6B Tractors - BPF11184
John Deere AutoTrac Controller Bracket - BPF10472
Position Receiver Bracket and Connector Kit - PF90758
Position receiver bracket and connector kitPosition receiver bracket and connector kit
StarFire Receiver Bracket Bundle - BPF11185
StarFire Receiver Bracket Kit - (MY13-MY16) 6M Tractors - BPF11274
StarFire Receiver Deluxe Shroud - PF90739
StarFire Receiver Deluxe shroudStarFire Receiver Deluxe shroud
StarFire Receiver Universal Mounting Bar Kit - BPF11356

GreenStar Implement Control Kits

Active Implement Guidance Counterbalance Valve - BPF10548
Active Implement Guidance External Valve Bracket Kit - BPF10352
Active Implement Guidance Implement Feedback Harness (4 Meter) - BPF10032
Active Implement Guidance Implement Feedback Harness Extension (9 Meter) - BPF10019
Active Implement Guidance Implement Feedback Sensor - BPF10024

Machine specific kits provide dealers with all of the hardware and harnessing to equip your 2410C or 2510H with dry applicator with AccuFlow Vortex Cooler minus:

  • EVA hose
  • Vapor hose
  • Nurse tank hose
  • GreenStar Rate Controller
Active Implement Guidance or iGrade Closed Center Valve - BPF10383
Active Implement Guidance or iGrade External SCV Switch and Harness Kit - BPF10356
Active Implement Guidance or iGrade Open Center Valve - BPF10382
Bracket Assembly - John Deere 2510 Series Applicators - PF90826
CAN Front Extension Harness (12 meter) - PF90553
Front Extension Harness (10 meter) - BPF11284
Front Extension Harness (3 meter) - BPF11285
High Current Power Extension Harness (3 meter) - PF90825
Implement Mast - For universal use on 3", 4", 5" or 6" Frame Tubes - PF90523
Implement Mast - For universal use on 7" or 8" Frame Tubes - PF90524
Implement Mast - John Deere CCS Planter With Refuge Plus Tank (MY2006 and Newer) - PF90549
Implement Mast - John Deere CCS Planter Without Refuge Plus Tank (MY2004 and Newer) - PF90525
Implement Receiver Harness - PF90538
John Deere Application Controller Mounting Hardware - 6R - BPF10940
John Deere Application Controller Mounting Hardware - 7R - BPF10732
John Deere Application Controller Mounting Hardware - 8000, 8010 and 8R Wheeled Series Tractors  - BPF10041
John Deere Application Controller Mounting Hardware - 8000T and 8010T Series Tractors - BPF10020
John Deere Application Controller Mounting Hardware - 8020 Wheeled Series Tractors - BPF10022
John Deere Application Controller Mounting Hardware - 8020T Series Tractors - BPF10021
John Deere Application Controller Mounting Hardware - 8RT Series Tractors - BPF10042
John Deere Application Controller Mounting Hardware - 9000 and 9020 Wheeled and Track Series - BPF10023
John Deere Application Controller Mounting Hardware - 9R with Standard Hydraulics - BPF11173
Power Extension Harness (11 meter) - PF90592
Switch and power extension harnessSwitch and power extension harness
Power Harness - 4WD Tractor - BPF10404
Power Harness - Row Crop Tractor - BPF10403
iGrade Counterbalance Valve - BPF10547
iGrade or Active Implement Guidance Implement CAN Extension Harness - BPF10018
iGrade or Surface Water Pro Receiver Mounting Kit - PF90676
Surface Water Pro receiver mounting kit Surface Water Pro receiver mounting kit

GreenStar Miscellaneous Hardware

GreenStar Lightbar - BPF10028

The GreenStar™ Lightbar is a simple, economical Parallel Tracking™ display.

 

The 27 tracking indicator light-emitting diodes (LED) tell the operator how the machine is tracking in relation to the desired guidance line.

The operator steers the vehicle back to the guidance line.
 
GreenStar Lightbar can be run as a stand-alone unit or as a companion to either an Original GreenStar Display or GreenStar 2 (GS2) 2600, GreenStar 2 1800, or GreenStar 3 2630 Display.
 
NOTE: The GreenStar Lightbar cannot be power washed.

GreenStar/Gen 4 10" Display Touch Panel Protector Service Kit - PF90596

GreenStar and Gen 4 Harnesses

GreenStar Ready Harness Kit - 6M (MY16) FT4 Cab - BPF11333
GreenStar Ready Universal Guidance Kit, Upgradeable - John Deere or Competitive Models  - BPF10139
Harness - Field Doc Connect - PF90277
Harness for Field Doc ConnectHarness for Field Doc Connect
Harness - GreenStar Lightbar 4 Pin Extension - PF90937
Harness - GreenStar Mobile Guidance Kit - John Deere or Competitive Models - BPF10302
Harness - StarFire 300 (1.8 Meter) - PF90857
Harness - StarFire Position Receiver Extension (30 cm) - BPF10200
Harness - StarFire Position Receiver Radar Adapter - PF90350
Harness - StarFire Position Receiver to Cab Roof Bulkhead Connector - PF80722

Harvest Sensor Kits

Combine Moisture Sensor Retrofit Kit - 50 Series - PF90872
Combine moisture sensor retrofit kit on 50 SeriesCombine moisture sensor retrofit kit on 50 Series
Combine Sensor Kit - 50 Series - PF90874

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 60 or 70 Series - PF90873

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9400, 9500, or CTS Models (PIN 639999 and Below) - PF90866

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9400, 9500, or CTS Models (PIN 640000 and Above) - PF90867

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9410, 9510, or CTS II Models - PF90871

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9410, 9510, or CTS II Models (PIN 675000 and Above) - PF90870

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9600 Models (PIN 639999 and Below) - PF90864

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9600 Models (PIN 640000 and Above) - PF90865

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9610 Models - PF90869

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Combine Sensor Kit - 9610 Models (PIN 675000 and Above) - PF90868

First introduced in 1995, Combine Yield Monitoring and Combine Yield Mapping were John Deere’s first precision farming products. It is capable of monitoring or mapping yield and moisture on many of the older John Deere combines as field-installed attachments.

 

Harvest Monitor™ and Harvest Doc™ – 9060 Series Combines

*Harvest Monitor and Harvest Doc is retrofittable to 50 Series Combines

 

Functionality includes multi-client functionality, boundary recording, and weather and field condition recording as well as compatibility to GreenStar™ guidance products.

 

Harvest Monitor enables the operator to view yield and moisture while harvesting. It consists of the following components:

  • Grain tank-mounted moisture sensor
  • Mass flow sensor
  • GreenStar display
  • Associated brackets and harnesses

Harvest Doc enables the operator to record yield and moisture with GPS and later load the information into desktop software as maps and reports. To upgrade from Harvest Monitor to Harvest Doc, the following additional components are necessary:

 

StarFire™ Receiver

  • Apex™ desktop software
  • GreenStar display
Cotton Stripper Harvest Doc Kit - 7460 Model - BPF10237
Cotton Yield Sensor Kit - 9986 or 9996 Models (6-Row ONLY) - PF90882
Cotton yield sensor kit for 9986 or 9996 models Cotton yield sensor kit for 9986 or 9996 models

Machine Communication Radio

Machine Communication Radio All Makes Kit - BPF10776

Machine Control

Combine Hydro Handle for Machine Sync Application - BPF10405
John Deere Machine Sync 3/4 Bin Fill Kit - 70 Series Combine (MY'08 or MY'09) - BPF10504

StarFire RTK Kits

Base Station Kit for RTK Radio 900 - BPF10838
Base Station Kit for RTK Radio 900 with Tripod - BPF10837
Hi-Gain Base Antenna - PF91105
High-gain base antennaHigh-gain base antenna
Magnetic Rover Antenna - John Deere RTK Radio 900 - PF90347
RTK Dual Radio Harness - BPF10029
RTK dual radio harnessRTK dual radio harness
RTK Radio Extension Harness - 50 Ft. - PF90450
RTK Tripod with Labels - PF90886
RTK tripod with labelsRTK tripod with labels

PF80762 - Storage case for original GreenStar™ common components

RTK Universal Base Station Bundle 450 - PF91099
RTK Universal StarFire Mounting Bracket - PF90885
RTK universal StarFire mounting bracket RTK universal StarFire mounting bracket
Repeater Kit for RTK Radio 900 - BPF10839